18V Cordless 6-Piece Power Tool Kit with 3 x 5.0Ah Batteries & Charger, Accessory Set

• 3 x 5.0Ah Li-Ion Batteries
• 1 x /2 Charger
• 1 x 26″ Tool Bag
• 1 x 100 Pcs  Bit Accessory Set

18V Cordless 6-Piece Power Tool Kit with 3 x 5.0Ah Batteries & Charger, Accessory Set

Kit Includes

18V Combi Drill
18V Impact Driver
18V Rotary Hammer SDS Plus
18V Angle Grinder
18V Multi-Tool
18V Torch

Features

Combi Drill

Electric brake
Mechanical 2-speed control
Variable speed control trigger
Forward/reverse rotation
Twin LED job light
Ergonomic soft grip handle
Compact overall length of 198mm
Single sleeve keyless chuck
Lightweight design
Battery protection circuit
All metal gears

Impact Driver

Compact design with a short overall length of 138mm
One-touch bit installation
Fully Compatible with 18V 4.0Ah Battery with 36 minute charge time.
LED job light with pre-glow and afterglow functions
Enhanced dust and drip-proof performance
New compact charger
Compact and lightweight, 4-pole motor
Ergonomically designed handle
Lithium-ion battery, lighter weight, quicker charging and with more run time than an equal voltage Ni-Cad or Ni-MH battery.
Battery fuel gauge

Rotary Hammer

22 minute charge time with the air cooled Makstar Optimum Charging System.
Lithium-ion’s 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
Conveniently located push button for forward and reverse.
High comfort grips.
LED job light with afterglow.
One-touch sliding chuck for easy bit changes.
Triple operation mode: Rotary only, hammer only and rotary hammer.
Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions.

Angle Grinder

Electric brake
Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current
Forward and reverse trigger
LED job light
Ergonomic soft grip

Multi-Tool

Thumb On/Off switch, positioned for ease of use when holding body of machine.
Hex wrench holder on body.
Variable speed control dial.
Dust extraction attachment.
Accessories can be installed at 30º increments, across 360º
Uses OIS interface.

Torch

12 pivoting positions with 0 to 170º swivel range
4 LED bulb for maximum illumination
Lightweight and compact for work in tight spaces
Accessory strap enables tool suspension for hands-free work
54 hours of continuous run-time

Comes With

1 x /2 Charger
3 x 5.0Ah Li-Ion Batteries
1 x 26″ Tool Bag
1 x 100 Piece Drill & Screwdriver Bit Set

Contents:

1 x Magnetic bit holder
1 x 2 x holesaws (32 and 38mm)
1 x Holesaw arbor
1 x Countersink
3 x wrench bits (6, 8 and 10mm)
2 x flat wood bits (12 and 16mm)
6 x HSS drill bits (2, 2 x 3, 4, 5 and 6mm)
7 x 3-point wood drill bits (2 x 3, 4, 2 x 5, 6 and 8mm)
4 x masonry drill bits (2 x 6, 7 and 8mm)
12 x 50mm screwdriver bits (5 x Philips (, 3 x and)
5 x Pozi (, 3 x and) and 2 x Torx (and))
1 x tic-tac tub containing 25 x 25mm bits and 36 x 25mm screwdriver bits (6 x Torx (, , , , and)
7 x Philips (2 x , 3 x and 2 x)
4 x slotted (4, 4.5, 5 and 7mm)
4 x Hex (4, 5, 6 and 7mm) and 15 x Pozi (2 x , 11 x and 2 x)

Product Specifications

Part No.:

Combi Drill

Impact Driver

Battery Type – Lithium-ion
Voltage – 18v
Electric Brake
Variable Speed Control
Impacts – 0-3200 ipm
Drive shank Hex – 6.35mm (1/4″)Reverse switch
Standard Bolt –
Joblight
No Load Speed – 0-2300rpm
Max Torque – 160Nm
Vibration: Fastening Bolt – 15.5 m/sec²
Vibration K factor – 2 m/sec²

Rotary Hammer

Battery Type – Lithium-ion
Charging Time – 22min
Voltage – 18v
Max in concrete – 20mm
Max. in steel – 13mm
Max. in wood – 26mm
Impact energy – 2.0J
Blows per minute – 0-4000bpm
Noise sound pressure – 87dB(A)
Noise sound power – 98dB(A)
Noise K factor – 3dB(A)
No Load Speed – 0-1100rpm
Vibration: Drilling – 3 m/sec²
Vibration K factor – 1.5 m/sec²
Vibration: Hammer Drilling – 14.5 m/sec²
Vibration: Chiselling – 11 m/sec²

Angle Grinder

Multi-Tool

Battery Type – Lithium-ion
Charging Time – 22 min
Voltage – 18v
Oscillation Angle – 3.2 º
Oscillations per Minute – 6000 – 20000
Vibration K factor – 1.5 m/sec²
Vibration: Cutting Metal – 5 m/sec²
Vibration: Cutting Wood – 9.5 m/sec²
Vibration: Chiselling – 7.5 m/sec²
Vibration: Sanding – 2.5 m/sec²

Torch